Posted by: Steve Rutter - 24 March 2009 17:52:04
All, Right side Semaphore is not popping out when indicator stalk engaged, I have checked the wiring behind dash visually and physically for loose connections. Front & rear indicators on both wings are working o.k. Anything else I should consider ?

Posted by: Sunroof53 - 25 March 2009 18:31:10
Check the voltage at the switch If not check the switch If yes try and pull semaphore out .This is tricky as you have to use a thin scredriver to lift the latch first .dont force it . Check the wiring . Upper wire is for light on speedo,Lower wire is live for the coil.The body is earthed . if no good remove semaphore and clean up the screw and faces . Check coil on semaphore is not open circuit. Order is not specific but most probably just a bad earth or corroded terminal