Posted by: Ivan - 13 August 2010 18:19:25
Has anyone got a contact for either seals or rebuild kits for 16mm four bolt rear wheel cylinders? Any leads would be vewry helpful. Cheers.

Posted by: cupa65 - 13 August 2010 20:40:00
Hi Try PRS in Billericay 01277 630099

Posted by: Ivan - 16 August 2010 12:14:32
[quote=cupa65]Hi Try PRS in Billericay 01277 630099[/quote] Cheers, will do!

Posted by: cupa65 - 20 August 2010 21:07:47
Hi Think Peter Ebling has them listed but they're not cheap:cry: :cry:

Posted by: GKL 7 - 20 August 2010 22:05:33
He's sorted,and it was cheap:wink:

Posted by: rob66 - 19 November 2010 17:11:28
Hi I am also looking for these where did you get them from in the end Thanks

Posted by: GKL 7 - 19 November 2010 18:05:32
[quote=rob66] where did you get them from in the end Thanks[/quote] I sent Ivan a complete wheel cylinder. So it wasn't determined in the end who stocked the seals. Is it 16's or 19's you are after??Could help with a 19 complete wheel cylinder(NOS)if you are in need.

Posted by: rob66 - 19 November 2010 18:25:22
HI Basically I need both all 4 cylinders have been sitting in a pot for the last 10 years and the rubbers are breaking up. I think I have sourced the 19mm seals but i am not having much luck with the 16's. I really want to try and keep the old cylinders if poss but otherwise I would be interested in the cylinder that you have thanks. The car is June 1950 so it 16mm at the rear and 19mm at the front

Posted by: GKL 7 - 19 November 2010 19:23:15
LMK via PM if you don't find yourself some seals.I had a pair of 19's and a pair of 16's until recently now just the one 19.